1
/
af
1
Varenummer (SKU):1312320
sE Electronics 2300 Studie kondensator mikrofon
sE Electronics 2300 Studie kondensator mikrofon
Share
Normalpris
2.549,00 DKK
Tilbudspris
2.549,00 DKK
Normalpris
Enhedspris
/
pr.
Inkl. moms.
Forsendelse beregnes ved kassen.
- Stormembran mikrofon til det kræsne hjemmestudio.
- Her får du masser af muligheder bla. at skifte mellem 3 karakteristikker. Nyre, kølle og omni, hvilket gør mikrofonen yderst alsidig.
In the box
- sE2300 Studio Condenser Microphone
- Isolation Pack (shockmount, pop filter)
- Thread adapter
- sE Logo sticker
- User manual with warranty card
Specifications
- Capsule Type: Hand-crafted 1" True Condenser
- Polar Pattern: Cardioid, Omni-directional, Figure-8
- Frequency range: 20 Hz - 20 kHz
- Sensitivity: 24 mV/Pa (-32.5 dBV)
- Max SPL: 126 / 136 / 146 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
- Equivalent noise level: 9 dB(A)
- Dynamic range: 117 / 127 / 137 dB (0/10/20 dB Attentuation pad)
- Signal to Noise Ratio: 85 dB
- Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
- Attenuation Pad: 10 / 20 dB, switchable
- Powering: 48 Volts according to IEC 61938
- Electrical Impedance: 40 Ohms
- Recommended load impedance: >1k Ohms
- Current consumption: 4.8 mA
- Connectivity: 3-pin male XLR connector
- Dimensions: Diameter: 51mm, Length 215mm
- Weight: 611 g
Finansiering
Kunne ikke indlæse afhentningsoplysninger
- Stormembran mikrofon til det kræsne hjemmestudio.
- Her får du masser af muligheder bla. at skifte mellem 3 karakteristikker. Nyre, kølle og omni, hvilket gør mikrofonen yderst alsidig.
In the box
- sE2300 Studio Condenser Microphone
- Isolation Pack (shockmount, pop filter)
- Thread adapter
- sE Logo sticker
- User manual with warranty card
Specifications
- Capsule Type: Hand-crafted 1" True Condenser
- Polar Pattern: Cardioid, Omni-directional, Figure-8
- Frequency range: 20 Hz - 20 kHz
- Sensitivity: 24 mV/Pa (-32.5 dBV)
- Max SPL: 126 / 136 / 146 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
- Equivalent noise level: 9 dB(A)
- Dynamic range: 117 / 127 / 137 dB (0/10/20 dB Attentuation pad)
- Signal to Noise Ratio: 85 dB
- Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
- Attenuation Pad: 10 / 20 dB, switchable
- Powering: 48 Volts according to IEC 61938
- Electrical Impedance: 40 Ohms
- Recommended load impedance: >1k Ohms
- Current consumption: 4.8 mA
- Connectivity: 3-pin male XLR connector
- Dimensions: Diameter: 51mm, Length 215mm
- Weight: 611 g